Evolve LED Canopy Light - ECBB New

Evolve™ LED Canopy Light - ECBB

Product ID: ECBB

The GE Evolve™ LED Canopy Light family provides an energy-efficient and robust means for lighting areas with canopies, such as gas stations, truck stops and drive-thrus at banks, pharmacies and restaurants.


Applications

  • Designed to meet recommended illuminance requirements for under canopy applications


Housing

  • Die-cast aluminum housing incorporates the heat sink directly into the unit for heat transfer
  • Meets 1.5 vibration standards per ANSI C136.31-2010


LED & Optical Assembly

  • Structured LED array for optimized under canopy photometric distribution
  • Evolve™ light engine consisting of reflective technology designed to optimize application efficiency and minimize glare
  • Utilizes high brightness LEDs, 70 CRI at 4000K & 5000K typical
  • Drop Lens distribution added for unique applications requiring high angled light and increased visibility to the light source
  • LM-79 tests and reports are performed in accordance with IESNA standards


Lumen Maintenance

  • System rating is L90 at 50,000 hours for A5 & B5 optical codes and L85 at 50,000 hours for C5 optical code. Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 50,000 hours.


Ratings

  • UL/cUL Listed, suitable for wet locations per UL 1598
  • IP66 rated optical enclosure per ANSI C136.25-2009
  • Temperature rated at –40° to 50°C (C5 SKUs: –40° to 40°C)
  • Upward Light Output Ratio (ULOR) = 0
  • Compliant with the material restriction requirements of RoHS


Mounting

  • Various options available for both new construction and retrofit requirements


Finish

  • Corrosion resistant polyester powder paint
  • Standard colors: White, Dark Bronze and Black


Electrical

  • 120-277 volt and 347-480 volt (B5 and C5 optical only), 50/60Hz
  • System power factor is >90% and THD<20%
  • Class “A” Sound rating
  • EMI: Title 47 CFR 15 Class A
  • Motion sensor and integral photo electric sensor available
  • Surge Protection Options: For 120-277VAC and 347-480VAC per IEEE/ANSI C136.2-2015
    • 6kV/3kA “Basic” standard
    • 10kV/5kA “Enhanced” R option


Note: For a canopy design the wall reflectances should be set to 0%.