Environmental - Compact Fluorescent Lamps

CFL

GE's compact fluorescent lamps give more light and less heat, converting up to 25% of the electricity they use into light (incandescent lamps convert just 5% into light and the remaining 95% into heat), thus resulting in higher energy efficiency (50-75 Lm/W).


GE's compact fluorescent lamps give more light and less heat, converting up to 25% of the electricity they use into light (incandescent lamps convert just 5% into light and the remaining 95% into heat), thus resulting in higher energy efficiency (50-75 Lm/W). Installing these lamps, you can save more on natural resources as well as in costs by using less energy. They also last up to 15 times (6-15.000 hours) as long as incandescent lamps, producing less waste as well as minimal maintenance.

In compact fluorescent lamps a higher-value triphosphor is used, which gives a higher colour rendering capacity to our products.

Biax™ Q/E

CFL

 
Has an extra high energy-efficiency value (74 Lm/W) and long lifetime (12.000 hours).

Electronic Biax™ Extra Mini
This new product, introduced in 2002; has narrower tubes, which results in higher energy-efficiency (60-65 Lm/W) and longer lifetime (15.000 hours).

Genura™

CFL

 
Based on fluorescent gas discharge and electromagnetic induction operating principles, the Genura™ R80 lamp is part of GE's range of "energy saving" lamps. The Genura™ R80 can be used to replace existing incandescent reflector (R80) lamps rated up to 100W, by providing a savings of over 75% in energy consumption. In the same time by maintaining similar light output levels combined with an extra long lifetime, the result is lower waste production as well as lower maintenance costs. It is perfect to replace conventional incandescent lamps, by providing the same shape and better performance. The GE
Genura™ lamp has a wide light distribution beam, thus able to illuminate the same area with fewer lamps.

Biax™ 2D™

CFL

 
GE developed and patented this innovation, which provides almost circular light output, making it ideal in small places, where high output is required. Under these circumstances, an important requirement is that the UV radiation from the light-source does not damage the plastic fixture. Therefore, these products were designed to meet the UV-PET value of over 1000 to ensure a long appliance lifetime.