Industrial HID

The common denominator of all applications is to provide sufficient illumination on work surfaces, while reducing the number of mixtures installed as much as possible. To achieve this level of efficiency together with a variety of visual appearance, it is important to have a wide range of reflectors offering a large variety of lighting distributions: direct lighting different beams (narrow, medium, large), direct-indirect lighting or diffused lighting.
Another important factor is the type of environment. In industrial applications, the air often contains fumes, oil mist, moisture and dust, which can affect the optical performance of lighting systems. The fixtures should have an enclosed and sealed optical assembly, and even more importantly, an activated charcoal filter to remove airborne particles and gases before they contaminate and deteriorate the reflector. In environments where the atmosphere is not as aggressive, open and ventilated fixtures can be used.


Eurobay / EB

EUROBAY / EB
HPS / MV up to 400 W
Optical assembly IP 23 (also available IP65). Gear compartment IP 65
RAL7038.
Eurobay luminaires for interior applications for medium-high installation heights, feature a low-profile design. High purity aluminium reflector anodized with mirror-finish. Ideal for clear bulbs.
Enlarged Image

Filterglow / FG

FILTERGLOW / FG
HPS / MH up to 1000W
Optical assembly IP 65. Gear compartment IP 52
RAL7035.
Luminaire suitable for use in damp environments, with an enclosed and filtered optical assembly. There are two sizes, FG-17, up to 400 W and FG-22 up to 1000 W. Particularly suitable for industrial lighting applications, including environments with a high level of dust and fumes, mounting heights over 4 meters.
Enlarged Image

Versabeam / VSB

VERSABEAM / VSB
HPS / MH up to 400 W
Optical assembly IP 52. Gear compartment IP 52
Luminaire suitable for use in damp environments. Over 90% efficiency. Utilization factors superior to those with traditional design thanks to concentration of 50% of the lamp total flux between 15º and 50º vertical, and of 70% between 0º and 60º. Reduced direct luminance, to avoid any discomfort, thanks to restriction of the flux above 60º.
Enlarged Image

Garage Gard / GGD

GARAGE GUARD / GGD
HPS / MH up to 150 W
Optical assembly IP 20. Gear compartment IP 44, optionally IP 43
RAL7035.
Close luminaire suitable for use in damp environments. The special distribution of the light through the prismatic refractor enables to use it with reduced mounting heights, giving excellent illumination of vertical surfaces. Mounting height over 2.2 meters.
Enlarged Image

Low Mount / LOW

LOW MOUNT / LOW
HPS / MH up to 400 W
Optical assembly IP 54. Gear compartment IP 54
RAL7035
Luminaire suitable for use in damp environments, with charcoal filtered optical assembly. The exclusive design of the faceted reflector and prismatic refractor gives low glare combined with high visual comfort. Mounting height between 2.5 and 8 meters. There are two versions LOW-250 supports up to 250 W and LOW version support up to 400 W.
Enlarged Image

Conserva / CON

CONSERVA / CON
HPS / MH up to 400 W
Optical assembly IP 54. Gear compartment IP 54
RAL7035.
Luminaire suitable for use in damp environments. There are two versions  CON-250 supports up to 250 W and  CON-400  up to 400W.
The exclusive design of the faceted reflector and prismatic refractor reduce glare while providing a high level of visual comfort.
Enlarged Image

Uniglow / UG

UNIGLOW / UG
HPS / MH up to1000 W
Optical assembly IP 20, enclosed version IP54. Gear compartment IP 52
RAL7035.
Luminaire available in open or enclosed version which is also suitable for damp environments. There are two different sizes: UG-17 and UG-22.
Enlarged Image