Evolve LED Roadway Fixtures with Current Gen Optics New

Evolve™ LED Roadway Fixtures with Current Gen Optics

Evolve™ LED Streetlight Product ID: ERL1
Evolve™ LED Streetlight Product ID: ERLH
Evolve™ LED Streetlight Product ID: ERL2


The Evolve™ LED Roadway Luminaire is optimized for customers requiring a LED solution for local, collector and major roadways. GE's unique reflective optics are designed to optimize application efficiency, minimize glare, and 'shape' the light to where you want the light to go. The modern design incorporates the heat sink directly into the unit for heat transfer to prolong LED life. This reliable unit has a 100,000 hour design life, significantly reducing maintenance needs and expense over the life of the fixture. This efficient solution lowers energy consumption compared to traditional HID fixture for additional operating cost savings.



Features/Benefits

  • 1,900 to 30,000 lumen output
    ➥ Light output to support the particular requirement
  • 3000K and 4000K CCT
    ➥ Apply the right light to the roadway
  • Custom engineered reflective optic technology
    ➥ Optimizes application efficiency, minimizes driver glare, and 'shapes' the light to put the light where it is needed
  • 100,000 hour design life
    ➥ Reduces maintenance needs and expense over the life of the fixture
  • Type II Narrow, Type II Wide, Type III, Type IV Photometric Options
    ➥ Available lighting options fit your requirements
  • 0-10V and DALI dimming available
    ➥ Enable basic dimming capabilities of the fixture
  • Photo electric sensors (PE) available
    ➥ Basic fixture On/Off light control
  • LightGrid compatible
    ➥ Add wireless intelligence to the roadway system to monitor energy consumption, detect failures, dim fixtures remotely
  • Coastal Finish Available
    ➥ Protects the fixture from salt air in geographic areas by oceans
  • 120-277 volt and 347-480 volt
    ➥ Suitable for most geographic locations


Applications

  • Local Roadways
  • Collector Roadways
  • Major Roadway/Streets


Photometric Conversion from Previous Generation to Current Generation

Previous Description Current Description
A1, B1 Extra Narrow/Narrow Asymmetric A3 Type II Narrow
C1, E1 Asymmetric Short/Medium B3 Type II Wide
D1, G1 Asymmetric Forward/Extra Wide C3 Type III
F1 Asymmetric Wide D3 Type IV


Ratings

  • UL/cUL listed, suitable for wet locations per UL 1598
  • Std. Optical enclosure rated per ANSI C136.25-2009: ERL1 = IP65, ERLH = IP65, ERL2 = IP65
  • –40° to 50°C UL Ambient Typical
  • Upward Light Output Ratio (ULOR) = 0
  • Compliant with the material restriction requirements of RoHS
  • Surge Protection: per ANSI C136.2-2015:
    • Standard: 6kV/3kA "Basic: (120 Strikes)"
    • Optional Secondary: 10kV/5kA "Enhanced: (40 Strikes)"


Suggested HID Replacement Lumen Levels

  • ~4,000–5,000 lumens to replace 100W HPS Cobra-head
  • ~8,500–8,800 lumens to replace 150W HPS Cobra-head
  • ~8,500–11,500 lumens to replace 200W HPS Cobra-head
  • ~11,500–14,000 lumens to replace 250W HPS Cobra-head
  • ~21,000–30,000 lumens to replace 400W HPS Cobra-head

Note: Actual replacement lumens may vary based upon mounting height, pole spacing, design criteria, etc.


Mounting

  • Slipfitter with +/- 5 degree of adjustment for leveling
  • Integral die cast mounting pipe stop
  • Adjustable for 1.25 in. or 2 in. mounting pipe


Construction and Finish

  • Housing:
    • Die Cast Enclosure
    • Casting-integral heat sink for maximum heat transfer
  • Paint: Corrosion resistant polyester powder paint, minimum 2.0 mil. thickness
    • Standard colors: Black, Gray and Dark Bronze
    • RAL & custom colors available
  • Optional coastal finish available