Evolve LED Area Light – Scalable – EASA New

Evolve™ LED Area Light - Scalable – EASB

Product ID: EASB

The next evolution of the GE Evolve™ LED Area Light continues to deliver outstanding features, while adding greater flexibility, style and scalability. This latest design offers higher lumen outputs and provides even more photometric combinations in two ANSI color temperatures, providing the ability to meet even a wider range of area lighting needs. Additionally, the new EAS Evolve Luminaire comes with a specially designed auto dealership optics 10kV/5kA optical surge protection.


Applications

  • Site, area, and general lighting applications utilizing advanced LED optical system providing high uniformity, excellent vertical light distribution, reduced offsite visibility, reduced on-site glare and effective security light levels. 
  • Design makes this product ideal for small to large retailers, commercial to medical properties, strip malls to large malls, and big box retailers.


Housing

  • Die-cast aluminum housing. 
  • Slim architectural design incorporates a heat sink light engine directly into the unit ensuring maximum heat transfer, long LED life, and a reduced Effective Projected Area (EPA). 
  • Meets 3G vibration standards per ANSI C136.31-2010.


LED & Optical Assembly

  • Structured LED arrays for optimized area light photometric distribution. 
  • Evolve light engine consisting of nested concentric directional reflectors designed to optimize application efficiency and minimize glare. 
  • Utilizes high brightness LEDs, 70 CRI at 4000K and 5700K typical. 
  • LM-79 tests and reports are performed in accordance with IESNA standards.


Lumen Maintenance

  • System rating is L85 at 50,000 hours. Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 50,000 hours.


Ratings

  • UL/cUL isted, suitable for wet locations.
  • IP65 rated optical enclosure per ANSI C136.25-2009.
  • Temperature Rated at –40° to 50°C. (–40° to 35°C for 412W fixtures). Delayed start may be experienced below -35° C.
  • Upward Light Output Ratio (ULOR) = 0.


Mounting

  • Option A - 10-inch (254mm) mounting arm for square pole prewired with 24-inch (610mm) leads. 
  • Option B - 10-inch (254mm) mounting arm for round pole prewired with 24-inch (610mm) leads. 
  • Option C - Slipfitter mounting for 2 3/8-inch (60mm) O.D. pipe prewired with 24-inch (610mm) leads.


Finish

  • Corrosion resistant polyester powder painted, minimum 2.0 mil. thickness. 
  • Standard colors: Black & Dark Bronze. 
  • RAL & custom colors available.


Electrical

  • 120-277 volt and 347-480 volt available.
  • System power factor is >90% and THD <20%.
  • Class “A” sound rating.
  • Photo electric sensors (PE) available for all voltages.
  • GE dimmable PE socket is available, making the unit "adaptive controls ready." Contact manufacturer for details.
  • Integral surge protection: For 120-277 VAC and 347-480 VAC per IEEE/ANSI C62.41.2-2002, — 6kV/3kA Location Category C-Low (120 Events).
  • 10kV surge protection device available with "T" option.
* System power factor and THD is tested and specified at 120V input and maximum load conditions.


Case Studies

Classroom in Willoughby-Eastlake City School District with more energy-efficient lighting

Willoughby-Eastlake City School District

Renovations that include new lighting give the Willoughby-Eastlake City School District substantial annual energy savings while enhancing the learning environment.

Case Studies

GE Retail LED Lighting at KIA AutoSport

KIA AutoSport

Outdoor LED lighting from GE is helping auto dealer KIA AutoSport showcase its vehicle inventory with high-quality light while saving on energy and maintenance costs at its 6-acre facility in Columbus, Ga.

Case Studies

LED Outdoor Parking Lot Lighting 2

MetLife

GE's LED outdoor lighting and T8 linear fluorescent indoor office lighting (LFL) will save MetLife nearly $360,000 a year in energy costs in parking lots and at the company's St. Louis office.