Sorry, your browser is not fully supported

We have detected that you are using an Internet Explorer browser that is not fully compatible with this site. In order for to work properly, please upgrade the browser to Internet Explorer version 11 or higher. Also, check to make sure you are not running in Compatibility Mode. You may also choose to use an alternate browser like Google Chrome or Firefox.

Always keep your browser updated to enjoy the full experience that the web has to offer.

Update to latest version IE

Download Chrome

Download Firefox

Hide message

Full Disclaimer: Tax Deduction Eligibility Calculator

    This tool is aimed at assisting users in decision-making by providing analysis based on various assumptions and a variety of factors. While an effort has been made to use accurate assumptions and factors in developing this tool, GE MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT THE RESULTS DESCRIBED HEREIN WILL BE OBTAINED UNDER END-USE CONDITIONS, OR (ii) AS TO THE EFFECTIVENESS, SAFETY OR APPROPRIATENESS OF ANY DESIGN INCORPORATING GE MATERIALS, PRODUCTS, USES, RECOMMENDATIONS OR ADVICE. IN NO EVENT SHALL GE BE RESPONSIBLE FOR ANY LOSS RESULTING FROM ANY USE OF THIS TOOL.

    Each user bears full responsibility for making its own determination as to the suitability of GE's materials, products, recommendations, analyses, or advice for its own particular use. Each user must identify and perform all tests and analyses necessary to assure that its products and designs incorporating GE material or products will be safe and suitable for use under end-use conditions. Nothing in this or any other document, nor any oral recommendation or advice, shall be deemed to alter, vary, supersede, or waive any provision of this Disclaimer, unless any such modification is specifically agreed to in writing signed by GE. No statement contained herein concerning a possible or suggested use of any material, product or design is intended, or should be construed, to grant any license under any patent or other intellectual property right of General Electric Company or any of its subsidiaries or affiliates covering such use or design, or as a recommendation for the use of such material, product or design in the infringement of any patent or other intellectual property right. Questions about models and assumptions used in these calculations may be addressed to the Lighting Institute, GE Consumer and Industrial, Nela Park, Cleveland OH 44112. Tel: (216) 266-9000. e-mail: