We have detected that you are using an Internet Explorer browser that is not fully compatible with this site. In order for GELighting.com to work properly, please upgrade the browser to Internet Explorer version 11 or higher. Also, check to make sure you are not running in Compatibility Mode. You may also choose to use an alternate browser like Google Chrome or Firefox.
Always keep your browser updated to enjoy the full experience that the web has to offer.
GE's Tunnel LED luminaire helps to create a safe environment for traffic with white light for improved visibility and comfort –as well as an outstanding six years /24 hours a day operation with the same light source.
System rating is 50,000 hours @ L80 (80% lumen maintenance)
Optimized optical design based on international road tunnel and underpass lighting regulations (JTJ 026.1-1999, CIE 88:2004)
Utilizes High Brightness LEDs, 70CRI @ 6000K (4300K will be available by 2012)
200-240V input voltage available with electronic driver, PF>0.9, Class I
IP66 rated, suitable for wet location
Meets ANSI 2G vibration standards
Ideal mounting height 4m-8m
Optimal operation temperature: -25℃~40℃
With a perfect combination of aesthetics and functionality, makes the T250 luminaire ideal for efficient lighting of low speed tunnels as well as underpass, parking garage and industrial areas.
80% lumen maintenance at 50,000 hours
The 50,000 burning hours are equal appr. 5-6 years of operation before replacement and due to the 80% lumen maintenance you can expect consistent light output over life. Reduced energy consumption combined with a long rated life that enables the new LED T250 to provide significant operating cost benefits over the lifetime of the luminaire.
Tunnels are defined as a structure over a roadway that restricts the normal daytime illumination such that the drivers visibility is substantially diminished. Durability and precise light distribution are two essential characteristics of tunnel luminaires. GE LED tunnel fixture uses a high efficient optical system which provides high uniformity and excellent vertical light distribution with reduced glare.
Definitions of Tunnel
Lav (cd/m²): Luminance of the road surface averaged over the carriageway
LPD (W/m²): Light Power Density
Eav (lux): Horizontal illuminance averaged over a road area
Uo: Ratio of the minimum to average luminance over a defined area of the road surface viewed from a specified observer position (Uo=Lmin/Lav)
UI: Ratio of the minimum to maximum luminance along a longitudinal line through the observed position on the carriageway (Ul=Lmin/Lmax)
TI: Measure of the loss of visibility caused by the disability glare of the luminaires of a road lighting installation
Flicker: Flicker is rapid visible changes of light level